Shuanghu Production Base, Daxin Town,
Jimo District, Qingdao City, Shandong Province, China
Ring conveyor belt refers to the flat conveyor belt after production, because of the use of environmental or conditional constraints, must use the ring conveyor belt, we will vulcanize the flat conveyor belt joints (also known as hot sticky), so as to make it into a ring conveyor belt. The strength of the core joint of the belt can reach 90% of the strength of the main body of the belt. There is no obvious joint defect on the surface of the belt. Therefore, the circular conveyor belt is balanced in transportation and has small elongation in use. The core of annular conveyor belt is made of high quality cotton or vinylon interwoven canvas, usually 2-8 layers or nylon canvas (or polyester canvas) as the strong layer. The company can produce suitable length, width and thickness of ordinary type, heat-resistant type (< 180 C), cold-resistant type (not less than - 40 C), acid and alkali-resistant type, high-temperature type (not more than 200 C) and annular conveyor belt according to customers'needs.
1. The annular conveyor belt is divided into ordinary cotton canvas annular conveyor belt, strong annular conveyor belt, ordinary heat-resistant annular conveyor belt, strong heat-resistant annular conveyor belt, etc.
2. Core material: cotton canvas, nylon (NN) canvas, polyester (EP) canvas < br /> 3. Covering glue thickness: working face is 1.5-8 mm, non-working face is 0-4.5 mm < br /> 4. Layer number: 2-8 < br />. 5. Bandwidth: 200-2200mm < br />